GRAPHTEC miid LOGGER GL860 User Manual page 25

3.
Connect the extension terminal connection cable to the extension terminal base.
* Insert the extension terminal connection cable until the cable is securely locked.
* Connect in accordance with the connector shape.
4.
Connect one end of the extension terminal connection cable to the terminal connector on the GL860.
* Insert the extension terminal connection cable until the cable is securely locked.
When one terminal unit (20ch/30ch) is mounted, the connecting plate and flat-head screw are not used.
CAUTION
• How to remove the expansion terminal connection cable
When you want to remove the terminal connection cable from the GL860 or extension terminal base, please note the
following.
• Always press the both sides of the lock release lever and pull out straightly in a state where the lock is released.
• Please do not forcibly remove or do not pull out in a state where the lock is not released by pressing only the one side of
the lock release lever.
It may cause a connection failure of connector, please be careful when you remove it.
Extension terminal connection cable
Extension terminal connection cable
Lock release lever
2-6
CHAPTER 2 Checks and Preparation