Figure 118 Turning On the
Library
Quantum PX500 Series User's Guide
1 Verify that:
•
Power cables are firmly in place
•
All doors are closed
2 Turn on the power switch located in the lower left-hand corner of the
OCP (see
figure
118).
Power button
During the power up sequence, the library performs an inventory.
The power up sequence can take several minutes.
Setting the Library Options
To set the library options:
1 Press Setup from the Home screen. The OCP displays the Setup
screen (see
figure
Appendix C Installing the PX502 Library
119):
Installing the Library
OCP
3
222