Quantum PX500 Series User Manual page 190

Event Detail
Drv type from dmgr is
not known (type)
Failed to send response
(status)
Invalid element type in
get SCSI Start Addr
(type/sys Id)
Invalid element type in
get element count (type/
sys Id)
Receive async element
status - invalid data type
(type)
Receive async element
status - null element
(type, index)
SCSI Address does not
convert to valid element
type (addr/sys id)
Sensor grp unknown
(grp)
Stack data received and
no buffer to store it (cab
index, offset)
Stack message received
unexpectedly (cab index,
state)
Unexpected response
received (txid/sender)
Unknown cleaning
cartridge requested (drv
elemType)
Quantum PX500 Series User's Guide
Event Description
A firmware error has occurred.
A firmware error has occurred.
Bad element address.
Bad element address.
A firmware error has occurred.
A firmware error has occurred.
Bad element address.
A firmware error has occurred.
A firmware error has occurred.
A firmware error has occurred.
A firmware error has occurred.
A firmware error has occurred.
Chapter 4 SNMP Trap List
Category Reported By
Critical Sys manager
Critical Sys manager
Warning Sys manager
Warning Sys manager
Critical Sys manager
Critical Sys manager
Informational Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Informational Sys manager
Critical Sys manager
167