Quantum PX500 Series User Manual page 176

Event Detail
Test structure corrupt
(testId)
Insufficient num cart for
test (num)
Insufficient num drives
for test (num)
Insufficient num empty
slots for test (num)
Hand-cal offset fail
Hand-theta cal offset fail
Hand-trans cal offset fail
XY & hand cal offset fail
XY & hand_theta cal
offset fail
XY & hand_trans cal
offset fail
XY & Z cal offset fail
Quantum PX500 Series User's Guide
Event Description
An internal firmware error has
occurred.
Not enough tape cartridges in the
library to complete the system
test.
Not enough tape drives in the
library to complete the system
test.
Not enough empty bins in the
library to complete the system
test.
The calibration test used to
compute offsets for the robotic
hand has failed.
The calibration test used to
compute offsets for the robotic
hand in rotation has failed.
The calibration test used to
compute offsets for the robotic
hand in translation has failed.
The calibration test used to
compute offsets for the robotics
tray has failed.
The calibration used to compute
offsets for the robotics tray and
robotics hand has failed.
The calibration test used to
compute offsets for the robotics
tray and robotics rotation has
failed.
The calibration test used to
compute offsets for the robotics
tray and the robotics up/down
motion has failed.
Chapter 4 SNMP Trap List
Category Reported By
Critical Diagnostics
Warning Diagnostics
Warning Diagnostics
Warning Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
153