Environmental Conditions; Preparing For The Installation; Providing Necessary Tools And Equipment; Taking Esd Precautions - Quantum PX500 Series User Manual

Environmental
Conditions

Preparing for the Installation

Providing Necessary
Tools and Equipment

Taking ESD Precautions

Quantum PX500 Series User's Guide
Refer to appendix A
3
information.
Before you begin the installation procedure in this section, make the
following preparations as described in this section:
•

Providing Necessary Tools and Equipment

• Taking ESD Precautions
Provide the following tools for installing the PX502 library:
3
• 3 mm Allen wrench
• 2.5 mm Allen wrench
• #1 flat blade screwdriver
• Antistatic wrist strap included in accessory kit
Some components within the PX502 library contains static-sensitive parts.
3
To avoid damaging these parts while performing installation procedures,
always observe the following precautions:
• Keep the library turned off during all installation procedures.
• Use an antistatic wrist strap (included in the accessory kit).
• Keep static-sensitive parts in their original shipping containers until
ready for installation.
• Do not place static-sensitive parts on a metal surface. Place them
inside their protective shipping bag or on an antistatic mat.
Appendix C Installing the PX502 Library
on page 189 for environmental condition
Preparing for the Installation
203