Figure 56 Subsystem Tests Screen - Quantum PX500 Series User Manual

Figure 56 Subsystem Tests
Screen
Quantum PX500 Series User's Guide
The
System-level Test
• Health test
• Self tests
• Calibration stats
• Random Load/Unload
• Random (Slots Only)
• Random (Drive Focus)
• Sequential bins
• Sequential drives
2 Use the up and down arrows to select the system test and press
to execute.
3 When you are finished executing system-level tests, press
return to the
Diags
Subsystem Tests
To execute a subsystem test:
1 From the screen, use the up and down arrows to highlight
Diags
Subsystem Tests
The
Subsystem Tests
The
Subsystem Tests
• XYZ assembly test
• Hand assembly test
Chapter 2 Basic Library Operations
screen provides the following diagnostic tests:
screen.
and press .
Enter
screen displays (see
screen provides the following diagnostic tests:
OCP Components
to
Exit
figure 56):
Enter
2
81