Quantum PX500 Series User Manual page 185

Event Detail
Camera was
unexpectedly reset
Couldn't get mutex for
camera I2C (thrdx
status)
Unknown status for
OCP status LED (lib
status)
Internal request to send
null SCSI CDB
Queue insert failed when
receiving data out
SCB null in Release SCB
SCB null when receiving
data out
SCB null
Semaphore put failed
when receiving data out
Unexpected data out
received
Unexpected data
received
Quantum PX500 Series User's Guide
Event Description
The internal camera has been reset
since the last time the system was
powered on.
The operating system has failed to
create a resource.
The Front Panel hardware is in an
unknown state.
The operating system failed to
create a proper SCSI command
data block.
The operating system has failed to
create a resource for the SCSI
module.
The information in the SCSI
command is not present.
The information in the SCSI
command is not present.
The information in the SCSI
command is not present.
The operating system has failed to
create a resource.
Data out was received from the
host, but the SCSI server (the
current SCB) was not in a state to
receive the data.
Data in was unexpectedly sent to
the host
Chapter 4 SNMP Trap List
Category Reported By
Warning Image proc
Warning Image proc
Warning OCP
Critical SCSI
Critical SCSI
Critical SCSI
Critical SCSI
Critical SCSI
Critical SCSI
Critical SCSI
Critical SCSI
162