Quantum PX500 Series User Manual page 150

Quantum PX500 Series User's Guide
Field
Enable
Autoclean
Emulate
P-Series
Enable Barcode
Swap
Configured
Slots
Editing a Library Partition
To edit a library partition:
Note: The library must be offline to create or edit a library partition.
1 Select the partition link under the
The area below the
settings.
2 Edit the partition information as desired (refer to
to save the changes.
Apply
3 Click to clear the partition settings and return to
Clear
Library Partition.
Chapter 3 Quantum PX500 Series Remote Management
Description
Select this box to automatically clean the drives in
the partition when needed.
Select this box to return an P-Series inquiry string
to the host connected to this partition. The
partition will appear to the host as an P-Series
tape library.
Enables/disables swapping media type prefix
from the back of barcode to the beginning.
The configured slots option allows you to
designate the number of slots available and
reported to the host.
Partitions
section displays the selected partition
Partitions
Setup
section.
table 29) and click
Creating a
3
127