Table 49 Px502 Rail Hole Patterns And Mounting Positions - Quantum PX500 Series User Manual

Table 49 PX502 Rail Hole
Patterns and Mounting
Positions
Quantum PX500 Series User's Guide
Figure
Clip nut
The rails within the rack have a hole pattern that repeats
Note:
throughout the rail. X marks the screw positions. Install nut
clips (included in the accessory kit) on the rails if necessary.
4U
The marks above (X)
indicate the location of
mounting hardware on the
rack rails. Ensure that any
necessary mounting
hardware is installed on the
rack rails prior to installing
the chassis.
Appendix C Installing the PX502 Library
Description
Through holes require clip nuts to accept
mounting hardware.
Threaded holes require neither cage or clip nuts to
accept mounting hardware.
Front panel
Back panel
Front panel
1U = 1.75
Hole pattern
Top of rack
.312 in (7.92 mm)
.625 in (15.9 mm)
.625 in (15.9 mm)
.5 in (12.7 mm)
.625 in (15.9 mm)
.625 in (15.9 mm)
.5 in (12.7 mm)
Installing the Library
205