Quantum PX500 Series User Manual page 124

Quantum PX500 Series User's Guide
A separate window displays the barcode(s) sharing the barcode
string entered in the barcode field. Click the individual barcode label
to display the corresponding cartridge detail page.
Find Media ID
The show contents section allows the user to locate a specific media ID
within the library (slots, ports, drives, gripper, or address)
To find a media ID:
1 Enter a media ID, or partial ID with wildcards (*, ?) in the Media ID
field.
Note: Leaving the media ID field empty will result in listing all
barcode labels within the library.
2 Click .
Find
A separate window displays the media ID(s) sharing the string
entered in the media ID field. Click the individual barcode label to
display the corresponding cartridge detail page.
Select Map
The select map section allows the user to view the library in either a
physical or logical view. To toggle between physical and logical map,
click the
Physical/Logical Map
The
Note:
Physical/Logical Map
bottom of each
A physical view displays a high level physical
Physical Map:
representation of the library. Slots, magazines, drives, and fixed slots are
displayed as a panel located on either the left, rear, or right wall of the
library. Clicking on the panel name opens a zoom view of the panel (i.e.
similar to pulling out a loadport or drawer) displaying all elements (slots,
ports, or drives) in a spreadsheet format.
Note: The physical map may show gaps in the element numbering
depending on the load port configuration.
Chapter 3 Quantum PX500 Series Remote Management
button in the map section.
information is displayed at the
page.
Operations
Operations
3
3
101