Quantum PX500 Series User Manual page 143

Quantum PX500 Series User's Guide
agents, store data about themselves in Management Information Bases
(MIBs) and return this data to the SNMP requesters.
1 Under
Community Names
community information:
a A unique name in the
characters. No blank spaces are allowed.
IP address in the
b
Mask edit box ends in a zero, the value in the IP address edit box
must also end in a zero
Subnet mask in the
c
d Access rights for the new community:
•
Read Only
•
Read/Write
2 Click .
Save
A page displays indicating the community has been added.
Results
3 Click New in the Trap Destination area (see
addresses that are to receive the traps generated by the
PX500 Series,
for example,
Chapter 3 Quantum PX500 Series Remote Management
(see figure 80), click
field, the field holds up to 60
Name
field, if the value in the Network
IP Address
Network Mask
allows SNMP
read
allows both SNMP
12.34.56.78
to enter the new
New
field.
operations:
and operations.
read write
figure 80), to set the IP
Quantum
.
Setup
120