Quantum PX500 Series User Manual page 196

Event Detail
QSB Channel Errors
(channel/errors)
QSB Channel Failure
(channel/count)
QSB Channel Resyncs
(channel/resyncs)
RTC Failure
RTC Time not set
Unknown board
revision(board/Board
Revision)
Wrong CPLD
revision(board/CPLD
Revision)
ADC Sensor
Communication
Failed(channel/id)
BP is over
temperature(old temp/
new temp)
BRM is over
temperature(old temp/
new temp
BRM1 is over
temperature(old temp/
new temp)
Quantum PX500 Series User's Guide
Event Description
A QSB error has occurred.
A QSB failure has occurred.
A QSB resync has occurred.
The real time clock has failed.
The real time clock has not been
set.
An unknown board revision has
been detected.
Wrong CPLD revision detected.
The SPI flash has failed.
• channel 0-1id
• 2 SPI_ID_BP_ADC_1
• 3 SPI_ID_BP_ADC_2
• 14 SPI_ID_BRM_ADC
The backplane has experienced an
over-temp condition.
The BRM has experienced an
over-temp condition.
The BRM1 has experienced an
over-temp condition.
Chapter 4 SNMP Trap List
Category Reported By
Warning Sys monitor
Critical Sys monitor
Warning Sys monitor
Critical Sys monitor
Informational Sys monitor
Critical Sys monitor
Critical Sys monitor
Critical Sys monitor
Critical Sys monitor
Critical Sys monitor
Critical Sys monitor
173