Turning The Library On And Off; Turning On The Library; Figure 22 Turning On The Library - Quantum Scalar 50 User Manual

Turning the Library On and Off

Turning On the Library

Figure 22 Turning On the
Library
Quantum Scalar 50 User's Guide
This section explains:
• Turning On the Library
• Turning Off the Library
• Placing the Library On-line or Off-line
To turn on the library:
2
1 Verify that:
• Power cables are firmly in place
• All doors are closed
2 Push the power button located in the lower left-hand corner of the
OCP (see figure
During the power up sequence, the library performs an inventory.
The power up sequence can take several minutes.
Power button
Chapter 2 Basic Library Operations
22).
Turning the Library On and Off
OCP
36