Quantum PX500 Series User Manual page 164

Quantum PX500 Series User's Guide
Reboot Library
The button allows you to remotely reboot the library.
Reboot Library
To reboot the library:
1 Click .
Reboot
The library reboots.
Park for Shipping
Note: You must remove all tape cartridges from the library prior to
parking the library robotics for shipment.
The
Park for Shipping
library shipment. This places the library gripper in the correct position for
shipment and powers down the library,
library shipping restraints on the library gripper prior to shipping the
library. Refer to appendix D
shipping the library.
Shipping the library without installing the library gripper
Caution:
shipping restraints may result in damaging the gripper.
To park the library gripper:
1 Select the cabinet and click the
The library gripper moves to the shipment position.
Fibre Channel Bridge Rescan
The Fibre Channel bridge rescan button re-discovers any FC bridges
installed in the cabinet. Details of the scan will be presented under
tab.
Bridge
To rescan Fibre Channel bridges installed in the cabinet:
1 Click .
Rescan
The Fibre Channel bridges are scanned.
Chapter 3 Quantum PX500 Series Remote Management
button allows you to remotely park the robot for
HOWEVER
on page 229 for more information on
button.
Park
Utilities
, you must place the
FC
141
3
3
3