Figure 73 Create Key User; Figure 74 Remove Secure User - Quantum PX500 Series User Manual

Figure 73 Create Key User

Figure 74 Remove Secure
User
Quantum PX500 Series User's Guide
To create a :
Key User
Note: Only users with administrator privileges (other than the
default administrator) can create a secure user.
There is only one
Key User
1 Enter a secure password.
Note:
Key User Passwords
and include at least one non-alphanumeric character.
Spaces, double quotes ("), and blank passwords are
rejected.
match.
2 Verify the secure password by entering the password a second time
in the
Verify Password
3 Click to create the
Create
The is created.
Key User
Remove Key User
Once the is added, the
Key User
the bottom of the
Users
To remove the
Key User
Chapter 3 Quantum PX500 Series Remote Management
and the username is always
must be at least four characters long
Key User Password
box.
.
Key User
Remove Secure User
page (see figure 74).
, click .
Remove
skadmin
and must
Verify Password
section displays at
Setup
.
3
111