OCP Problems
Table 32 OCP Problems
Robotics (Gripper)
Problems
Quantum PX500 Series User's Guide
Table 32
describes corrective actions for OCP problems.
5
Problem
The OCP is blank.
The OCP does not
respond to
buttons.
An error number
or event is
displayed.
Table 33
describes corrective actions for robotics or gripper problems.
5
Common Problems and Solutions
Corrective Action
• Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them.
• Confirm that power is on and if the OCP is still
blank, contact an authorized Quantum field
service engineer (see
• Verify that the buttons are not stuck
underneath the front bezel.
• Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them. Power the library on and if the
OCP still does not respond to buttons, contact
an authorized Quantum field service engineer
(see
"Contacts"
on page xix).
Write down the error number and contact an
authorized Quantum field service engineer (see
"Contacts"
on page xix).
Chapter 5 Troubleshooting
"Contacts"
on page xix).
179