Quantum PX500 Series User Manual page 175

Event Detail
Codeupdate failed
(status)
Backplane nv erase err
(region id/status)
Backplane nv read err
(region id/status)
Backplane nv write err
(region id/status)
Hand-camera image fail
Hand-camera init fail
Selftest Camera FIFO
failure
Selftest display bram
failure
Scb-fpga camera fifo fail
Test details buffer
overflow (len/testId)
Test record semaphore
locked (index/tx-status)
Quantum PX500 Series User's Guide
Event Description
A code update has failed.
Non Volatile memory on the back
plane could not be erased.
Replace the backplane to restore
normal library operations.
Non Volatile memory on the back
plane could not be read. Replace
the backplane to restore normal
library operations.
Non Volatile memory on the back
plane could not be written.
Replace the backplane to restore
normal library operations.
The camera in the robotics hand
has failed to read an image.
The camera in the robotics hand
has failed its initialization routine.
The camera in the robotics hand
has failed to read its memory used
to transfer data.
The diagnostic buffer used to
report test results is not large
enough to hold the data.
The memory on the system
controller board has failed to read
the memory used to transfer data.
The diagnostic buffer used to
report test results is not large
enough to hold the data.
An internal firmware error has
occurred.
Chapter 4 SNMP Trap List
Category Reported By
Informational Code update
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
Critical Diagnostics
152