Figure 43 Subsystem Tests Screen; Quantum Scalar 50 User's Guide - Quantum Scalar 50 User Manual

Figure 43 Subsystem Tests
Screen

Quantum Scalar 50 User's Guide

1 From the screen, use the up and down arrows to highlight
Diags
Subsystem Tests
The
Subsystem Tests
The
Subsystem Tests
• XYZ assembly test
• Hand assembly test
2 Use the up and down arrows to select the subsystem test and press
to execute.
Enter
3 When you are finished executing subsystem tests, press
to the screen.
Diags
Component Tests
To execute a component test:
1 From the screen, use the up and down arrows to highlight
Diags
Component Tests
The
Component Tests
Chapter 2 Basic Library Operations
and press .
Enter
screen displays (see
screen provides the following diagnostic tests:
and press .
Enter
screen displays (see
OCP Components
figure 43):
to return
Exit
figure 44):
2
59