User Adjustment; Color Calibration; Auto Gray Adjust - Kyocera KM-C2520 Advanced Operation Manual

User Adjustment

Adjust color and image quality related settings. The following items can be set for user adjustment.
•
•
•
•
•

Color Calibration

After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed
color output may shift or color drift may occur. Using this function enables printing in the most
appropriate color by adjusting hue and color drift in detail. Use auto gray adjust when the color is not
enhanced even after performing color calibration (see page 7-31). If the hue and color are not
enhanced, use color registration (see page 7-33).
1
Press the System Menu/Counter key.
2
Press [User Adjustment].
3 Press [Color Calibrat.] ([Colour
Calibrat.]) .
4 Press [On]. Color calibration begins. Wait approximately 45 seconds.
5
Press [Close] after color calibration is complete.
6 Press [Close]. The display is returned to the System Menu screen.

Auto Gray Adjust

After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed
color output may shift or color drift may occur. Use this function to correct color settings when the
color of a finished copy does not match the original. Perform color calibration before using auto gray
adjust (see page 7-31). Use auto gray adjust when the color is not enhanced even after performing
color calibration.
NOTE: To perform auto gray adjust, verify that either 11 × 8
cassette.
1 Press the System Menu/Counter key.
Color Calibration...page 7-31
Auto Gray Adjust...page 7-31
Color Registration...page 7-33
Drum Refresh...page 7-36
Developer Refresh...page 7-36
System Menu / Counter
User adjustment
Auto gray Drum
adjust refresh
System Menu
" or A4 paper is loaded into a
1/2
System Menu
Color Color Developer
Calibrat. Regist. refresh
7-31