Kyocera KM-C2520 Advanced Operation Manual page 331

Display
Change the size of MP tray.
Check paper size.
Reposition original.
Check paper size. Copy paper is
not the same size as original.
(Paper size in cassette differs
from actual size.
Check paper size in cassette.)
Check original size.
Original size: 11 × 17", 8
(Check original size.
Original size: A3, A4R)
Change original destination.
Original size: 8 × 11"
1/2
(Change original destination.
Original size: A4R)
Reposition original or change
cassette.
(Reset original or select another
paper cassette.)
Reset originals in processor.
Reset all originals in processor.
(Reset originals in processor.)
Reset all originals in Document
Processor.
(Reset originals in Document
Processor.)
Cannot copy this paper type.
Cannot staple this paper type.
Cannot punch this paper type.
Cannot offset this paper size.
(Cannot group this paper size.)
Checkpoints
Is the specified size paper loaded in
the MP tray?
Is the specified size paper loaded? Load paper of a size that can be
Is the orientation of the specified
paper different from that of the
original?
Is the specified paper loaded? Or
are the settings incorrect?
Is Poster enabled?
× 11"
1/2
Is Poster enabled?
Is the orientation of the specified
paper different from that of the
original?
Is the machine installed beneath
fluorescent lights?
Are there any originals left in the
optional document processor?
Can the specified copy functions be
used with the selected paper type?
Did you select a paper type that
cannot be stapled?
Did you select a paper type that
cannot be punched?
Is a paper size not supported by
Offset mode (11 × 17", 8
5 × 8 ", A3, B4, A5R, B6R,
1/2 1/2
Folio, 8K) loaded?
Corrective Actions
Reconfigure the size of the MP tray. Refer to
used.
Change the orientation of the
original. If you press the Start key
without doing so, the original will be
copied at the current size.
Load the specified paper. Adjust any
settings that are incorrect.
11 × 17", 8
Original other than the above sizes
has been loaded. Poster feature is
available for 11 × 17", 8
or A4R size originals only.
Poster is not available for the
currently placed original orientation.
11 × 8
above sizes, set in horizontal
direction.
Change the orientation of the
original.
Do not install this machine beneath
fluorescent lights.
— Remove originals from the optional
document processor, stack them
uniformly and reset them.
— Remove originals from the optional
document processor, and reset them
in the original order.
Remove all originals in the optional
document processor.
Select another type of paper.
Select another type of paper.
Select another type of paper.
Change the paper size.
× 14",
1/2
× 11", A3, A4R -
1/2
× 11", A3,
1/2
", A4 - For originals of
1/2
Troubleshooting
Reference
Page
Operation
Guide,
Chapter 2
—
—
—
page 1-22
page 1-22
—
—
Refer to
Operation
Guide,
Chapter 2
Refer to
Operation
Guide,
Chapter 2
—
—
—
—
page 1-9
9-7