Kyocera KM-C2520 Advanced Operation Manual page 334

Troubleshooting
Display
Clean the slit glass for original
fed from DP.
(Clean the slit glass for original
fed.)
Check the waste punch box.
(Check Punch Hole box.)
Empty waste punch box.
Out of staples.
Add staples.
(Stapler empty.
Add staples.)
Time for maintenance.
Paper misfeed.
Remove paper from inner tray of
Finisher.
Remove paper from the folding
unit of the Finisher.
Staple jam.
System error.
Call service.
Paper cassette is out of order.
Select another paper cassette.
(Paper cassette is out of order.
Select other paper cassette.)
System error.
Main Power Switch Off / On.
9-10
Checkpoints
—
Is the optional 3000 sheet document
finisher waste punch box securely
fastened?
Is the container for hole punch waste
paper in the optional 3000 sheet
document finisher full?
Is the optional document finisher or
3000 sheet document finisher out of
staples?
—
—
Is there any paper left in the optional
document finisher or 3000 sheet
document finisher?
Is there any paper left in the folding
unit of the optional 3000 sheet
document finisher?
Is the optional document finisher or
3000 sheet document finisher
experiencing a staple jam?
Is it re-displayed after opening and
closing the front cover, turning off
and on the main power switch, and
plugging out and plugging in the
power plug in the power outlet?
—
—
Corrective Actions
Rub the slit glass with the included
dry cleaning cloth.
Refer to the optional 3000 sheet
document finisher Operation Guide
to securely fasten the waste punch
box.
Refer to the optional 3000 sheet
document finisher Operation Guide
to empty the waste punch box.
Refer to the optional document
finisher or 3000 sheet document
finisher Operation Guide to refill
staples.
Periodic maintenance is required to
maintain the equipment in good
condition. Contact your Service
Representative or Authorized
Service Center promptly.
If a paper jam occurs, the location of
the jam will be indicated on the
touch panel and the machine will
stop. Leaving the main power
switched on (| position) follow the
instructions to remove the jammed
paper.
Remove all paper left in the optional
document finisher or 3000 sheet
document finisher.
Refer to the optional 3000 sheet
document finisher Operation Guide
to remove all paper left in the
ejection section of the folding unit.
Refer to the optional document
finisher or 3000 sheet document
finisher Operation Guide to remove
the jammed staple.
Make a note of this message (C
followed by a number). Switch off
the power ( position), unplug the
power cord, and contact your
Service Representative or
Authorized Service Center.
The cassette in use has a problem
and is temporarily unavailable.
Contact your Service Representative
or Authorized Service Center
promptly. To continue copying, use
another cassette.
A system error has occurred. Turn
the main power switch off and on
again.
Reference
Page
Refer to
Operation
Guide,
Chapter 5
—
—
—
—
Refer to
Operation
Guide,
Chapter 6
—
—
—
—
—
—