Kyocera KM-C2520 Advanced Operation Manual page 126

Printer Settings
3
Press [RAM DISK Mode].
4 Press [On].
5 Press [Close].
Restart now? message is displayed.
6 Press [Yes]. This device restarts. RAM Disk mode is set to [On] (enabled).
RAM Disk Size Setting
Specify the amount of memory from this device total memory to allocate to the RAM disk. Enabling
this function allows the use of electronic sorting and decreasing total printing time.
The maximum size that can be allocated is the amount of total memory minus 36 MB. For instance,
if 512 MB of extended memory as been installed, the total memory is 768 MB (including 256 MB
installed at the factory), so the maximum RAM disk size is 768 MB minus 36 MB, or 732 MB.
NOTE: Set the RAM Disk data size after setting RAM Disk mode to [On].
1 Press the Printer key.
2 Press [Printer Menu].
3
Press [RAM DISK Mode].
4 Press [RAM Disk Size].
5 Press [+] or [–] to set the RAM Disk size.
6
Press [Close]. If the memory size has been changed, Do you want to restart immediately? message
is displayed.
3-32
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Color Mode
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Color Mode
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
RAM DISK Mode
Write Data
Off
List of
Partitions
On
RAM Disk
Size
Printer menu
Others
Others
Back
Delete
Read