Kyocera KM-C2520 Advanced Operation Manual page 88

Document and Output Management Functions
6
Complete the scanning settings required for the original.
The following functions are available.
Tab
Basic
Quality
Edit
†
7 Press the Start key. Scanning of the original begins. Display is returned to Document Management
when complete. To register other documents, repeat steps 2 to 7.
Combining and Printing Documents
Combine and print documents stored in the Synergy Print Box as follows. You can combine up to 10
documents for printing as a single copy job.
1 Press the Document Management key.
2
Press [Document Printing] under Synergy Print Box.
3 Select the box where the documents for printing are stored. Directly press the box key or use the
numeric keys to input the box number and press [Enter].
If a password has been set up for the box, a screen for password entry will be displayed. Use the
numeric keys to enter the password and press [Enter].
NOTE: See Setting Box Passwords on page 2-9 for how to set a password.
4
Select the job to print and press [Finish
selecting]. You can choose up to 10
documents.
NOTE: You can change the document sort order. Press [Order of indication] and select from [Sort
by Date] ([New Old] and [Old New]) and [Sort by Name] ([A Z] and [Z A]).
Press [Document Properties] ([Check/Rev. Details]) to verify details of the selected document. For
further details, refer to Reviewing and Renaming Documents on page 2-7.
When selecting multiple documents, choose documents that are all the same size. An error will
occur if you select documents of different sizes.
2-6
Function
Selection of original sizes, selection of original types, selection of document
sizes, zooming, and original orientation
Scan exposure level, image quality, color balance
sharpness
Border erase and batch scanning
This setting is available when the color mode is set to Full Color or Auto Color.
ting
Select:
1 SUN 05:46
1 SUN 05:46
1 SUN 05:46
1 SUN 05:46
1 SUN 05:45
gement - Synergy Print Box
, hue adjustment ,
† †
Cancel
Order of Print once
Up
indication all data
Document
Properties
Select/
Down
Cancel
Finish
selecting