Printer Error Messages - Kyocera KM-C2520 Advanced Operation Manual

Display
HDD error.
Cannot activate Job Accounting
mode.
Please wait.
Remote edit.
(Please wait.
Remote editing.)
Security key is not recognized.

Printer Error Messages

If the Printer mode touch panel displays any of these messages after pressing the Printer key,
follow the corresponding procedure.
Display
Load Paper.
### size (###)
Use alternative?
Press GO.
Set paper Press GO.
Load Paper.
Out of staples.
Add staples.
(Stapler empty.
Add staples.)
Call service.
Account ID mismatch.
Checkpoints
Is it re-displayed after opening and
closing the front cover, turning off
and on the main power switch, and
plugging out and plugging in the
power plug in the power outlet?
Is Job account editing being done
from a network connected
computer?
Is it re-displayed after opening and
closing the front cover, turning off
and on the main power switch, and
plugging out and plugging in the
power plug in the power outlet?
Checkpoints
Does the print data match the feed
paper size and paper type?
—
—
Is the paper source empty?
Is the optional document finisher or
3000 sheet document finisher out of
staples?
—
—
Corrective Actions
A hard disk error has occurred.
Contact your Service Representative
or Authorized Service Center.
Copying is not possible until editing
is complete.
Contact your Service Representative
or Authorized Service Center.
Corrective Actions
Replace the size or type of source
paper.
To change the paper source, select
paper source from the touch panel
and press [GO].
To print on the loaded paper, press
the Printer key and press [GO].
To cancel printing, press the Printer
key and press [Cancel].
Displayed when paper source is
changed. Press [GO].
This mode supplies paper one sheet
at a time even if multiple sheets
have been loaded. To feed each
sheet, press [GO].
Load more paper.
Refer to the optional document
finisher or 3000 sheet document
finisher Operation Guide to refill
staples.
An internal error has occurred.
Contact your Service Representative
or Authorized Service Center.
No matching ID-code found. Verify
the registered ID-code using the
driver.
Troubleshooting
Reference
Page
—
—
—
Reference
Page
Refer to
Operation
Guide,
Chapter 2
—
—
Refer to
Operation
Guide,
Chapter 2
—
—
—
9-11