Kyocera KM-C2520 Advanced Operation Manual page 192

Setting Scanner from a Web Browser
Destination Registration (FTP)
Add or edit an FTP server.
Setting Item
Registration Number
Registration Name
FTP Server
Port Number
Path
Skip Authentication
Login Account Name
Change Password
New Password
Confirm New Password
Registration Button
Reset Button
Delete Button
5-26
Description
The number selected from the Destination List is shown here. This is
shown for to verify which number from the Destination Registration
(FTP) Table is being added or modified, and cannot be modified itself.
Field to enter the Registration Name. When a name is entered here, it
is shown in the Destination PC Registration table and on the scanner
device operation panel. Enter a registration name less than 16
characters long.
Enter the hostname or IP address for the FTP server. Enter the
hostname using less than 64 characters.
Enter the port number for the FTP server. (Usually 21)
Enter the path to the folder to which you wish to upload. For example,
to save to a ScanData folder in the home directory, input ScanData.
Data will be saved to the home directory if nothing is input.
If set to Yes, users are not prompted for username and password
when sending. If set to Yes, register the login account name and
password as below.
Input the user name to logon to the FTP server.
Set to Yes to change the password used to logon to the FTP server or
No to leave as-is.
To change the password, enter the new password using less than 32
characters.
For verification, re-enter the same password as in the New Password
field above.
Click the Registration button to save the settings to the scanner.
Entered data is lost if this button is not clicked.
Click the Reset button to reset any changes to the setting options.
Click the Delete button to delete the displayed destination.