Kyocera KM-C2520 Advanced Operation Manual page 180

Setting Scanner from a Web Browser
Sender (User) Setting
Click the user number from the Sender (User) List to show the Sender (User) Setting screen.
Setting Item
Registration
Number
Registration Name Field to enter the Registration Name. When a name is entered here, it is
E-mail Address
Address of
Address Book
installed PC
Save Number
Signature Line
Change Password Set to Yes to change the password or No to leave unchanged.
New Password
Confirm New
Password
Login Account
Name
Change Password Set to Yes to change the user's mail server authentication password or No to
New Password
Confirm New
Password
5-14
Description
The number selected from the Sender List is shown here. This is shown for
to verify which number from the Sender Setting table is being added or
modified, and cannot be modified itself.
shown in the Sender Registration table and on the scanner device operation
panel. Enter a registration name less than 16 characters long.
Enter a Sender (User) e-mail address using less than 64 characters.
Enter the address of the computer on which the Private Address Book
(included utility: Address Book for Scanner) has been installed. Enter the
hostname or IP address in 'XXX.XXX.XXX.XXX' notation.
Specify the PC save number for the destination PC for Scan to PC mode.
Specify a save number from 001 - 100.
Enter signature data to be attached during e-mail transmission. Enter text less
than 256 characters long.
To change the password, enter the new password here using less than 8
characters.
For verification, re-enter the same password as in the New Password field
above.
Enter the Login Account Name to use in mail server authentication by the
user. When specifying mail server authentication for each user, first configure
Mail Server Authentication in System Basic Setting. (See page 5-8)
leave as-is.
To change the user's mail server authentication password, enter the new
password here using less than 31 characters.
For verification, re-enter the same password as in the New Password field
above.