Registering Non-Standard Sizes For Originals - Kyocera KM-C2520 Advanced Operation Manual

System Menu

Registering Non-standard Sizes for Originals

Pre-register 4 types of non-standard original sizes. Registered sizes are shown as custom sizes
when selecting the original size.
The size range that can be registered is as follows.
Model Type
Inch models
Metric models
1
Press the System Menu/Counter key.
2 Press [Register Orig. Size].
3
Select the number to register from Original Size (custom 1 - 4) and press [Change #].
4
Press [Set].
5 Press [+] or [–] to set the Y (height) and X (width) sizes.
6 Press [Close] to save settings or [Back] to cancel settings.
7
Press [Close]. The display is returned to the System Menu screen.
7-30
Range
Height: 2 - 11 " (1/8" increments)
5/8
Width: 2 - 17" (1/8" increments)
Height: 50 - 297 mm (1 mm increments)
Width: 50 - 432 mm (1 mm increments)
System Menu / Counter
System Menu
Copy
Default
Scanner
Default
Machine
Default
Language
Printer MP tray
Default Setting
Document Register
Management Orig. Size
Job
Accounting
BOX
Management
Print
Report