Kyocera KM-C2520 Advanced Operation Manual page 332

Troubleshooting
Display
Cannot staple this size.
(Cannot staple this paper size.)
Cannot punch this size.
(Cannot punch this paper size.)
Cannot staple.
## :maximum capacity (Staple)
(Cannot staple.
## :Max. staples)
The top tray is full of paper.
Remove paper, and press "Start"
key.
The top tray is full of paper.
Remove paper, and press
"Continue" key.
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press "Start"
key.
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press
"Continue" key.
Remove paper. Finisher tray.
These functions cannot be
combined.
Exceeds pre registered copying
quantity.
(Copy limit for this ID-code has
been reached.)
Unable to copy. (Full-Color)
Job Accounting capacity has
limit.
(Cannot copy. (Full Col.)
Job Accounting capacity has
limit.)
Unable to copy. (Full-Color)
Exceeded the limitation of Job
Accounting.
(Cannot copy. (Full Col.)
Exceeded the limitation of Job
Accounting.)
9-8
Checkpoints
Is stapling available for the size of
the loaded paper? For further
details, see the optional document
finisher or 3000 sheet document
finisher Operation Guide.
Is punching available for the size of
the loaded paper? For further
details, refer to the optional 3000
sheet document finisher Operation
Guide.
Is the maximum page quantity for
stapling exceeded? For further
details, see the optional document
finisher or 3000 sheet document
finisher Operation Guide.
During copying, is the maximum
capacity of the output tray
exceeded?
During printing, is the maximum
capacity of the output tray
exceeded?
During copying, is the maximum
capacity of the optional document
finisher or 3000 sheet document
finisher output tray exceeded?
During printing, is the maximum
capacity of the optional document
finisher or 3000 sheet document
finisher output tray exceeded?
Is the maximum capacity of the
optional document finisher output
tray exceeded?
Have you selected functions that
cannot be used together?
Is the maximum limit for copying as
specified in Job Accounting mode
exceeded?
Is full color copy set to [Is not
permitted] ([Is not permited]) in Job
Accounting?
Is the maximum limit for copying as
specified in Job Accounting mode
exceeded?
Corrective Actions
Change the paper size.
Change the paper size.
Decrease the number of sheets to
be stapled to less than the maximum
staple sheet count.
Remove some pages from the
output tray and press the Start key.
Printing continues.
Remove some pages from the
output tray and press [Continue].
Printing continues.
Remove some pages from the
optional document finisher or 3000
sheet document finisher and press
the Start key. Printing continues.
Remove some pages from the 3000
sheet document finisher and press
[Continue]. Printing continues.
Remove some pages from the
optional document finisher.
Check the settings.
The copy volume has been reached
the set limit of your department. No
additional copying is possible. Clear
the copy count in Job Accounting.
Change the restriction setting for full
color copy in Job Accounting.
Clear the copy count in Job
Accounting.
Reference
Page
—
—
—
—
—
—
—
—
—
page 8-13
page 8-5
page 8-13