Kyocera KM-C2520 Advanced Operation Manual page 101

1
Press the Printer key.
2 Press [Printer Menu].
3 Press [Interface].
4
Press [Network].
NOTE: To set the optional network interface, press [Option].
5
Press [ ] or [ ] to select TCP/IP and
press [Change #].
6 Press [On].
7
Press [ ] or [ ] to select DHCP and press [Change #].
8
Press [On] or [Off] and press [Close].
9 Press [ ] or [ ] to select BOOTP and press [Change #].
10 Press [On] or [Off] and press [Close].
11
Press [ ] or [ ] to select IP Address and press [Change #].
12 Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
13 Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14
After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP Settings screen.
Press [Back] to reset the entered address and set the previous address.
Select item.
Printer menu
Print Sta-
Font
tus Page
Interface Page Set
Print
Emulation
Quality
Interface
Setting Item
NetWare On
TCP/IP On
Ethertalk On
Network Status Page Off
Parallel Network
Printer menu
IP Address
Confirm per 3 lines pressing # key.
.10 .0
Printer menu- Interface - Network
Printer Settings
Paper
Others
Handling
Color Mode
RAM DISK
Mode
Value
Change #
USB
Back
(with #key)
. 0 .0
- TCP/IP
3-7