Kyocera KM-C2520 Advanced Operation Manual page 29

3
Press [2 holes] or [3 holes] for the inch
model. Press [2 holes] or [4 holes] for
the metric model.
4 Select the hole punch position.
5 Place the original and press the Start key.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and
press the Start key.
If all original pages have been scanned, press [Scanning finished]. Copying begins.
Ready to copy. (
Staple/Punch
Staple Punch
Off Off
1 staple 2 holes
2 staples 3 holes
Copy Functions
Full-Color ) Paper Size
100%
Shortcut Back
Position
Select Original I
Direction.
Left side
Right side
Top side
Top Edge
1-13
11×8