Kyocera KM-C2520 Advanced Operation Manual page 77

Step 5: Leave Back Side of Original C Blank
16 Press [Print from Front page].
The back side of the page will be left
blank and copying will continue from the
next page.
Step 6: Complete the Settings for Original D
Select Cassette 1 (standard paper) for
paper setting.
17 Press [Select Paper].
18
Select Cassette 1 and press [Close].
19 Place the Original D and press the Start key. Scanning of the original begins.
Step 7: Specify Blank Colored Paper for the Back Cover
For paper selection, set MP tray (color
paper).
20 Press [Select Paper].
21 Select the MP tray and press [Close].
22
Press [Insert page] ([Insert blank page]).
23
All originals have been scanned. Press [Scanning finished]. Printing begins.
24 If there are no problems with the output, use Repeat Copy to produce additional copies as
necessary. For further details, refer to Repeat Copy on page 1-36.
This completes the steps for the above operation.
riginal(s).
riginals and press start key.
nning finished" key when starting copy.
- Step
1 sided 2 sided Copy
Original 1 sided/
Type 2 sided
Auto % Top Edge
Reduce Orig. Set
/Enlarge Direction
Quality Edit
riginal(s).
riginals and press start key.
nning finished" key when starting copy.
- Step
1 sided 2 sided Copy
Original 1 sided/
Type 2 sided
Auto % Top Edge
Reduce Orig. Set
/Enlarge Direction
Quality Edit
Copy Functions
Set
Cancel
Insert
page
2 sided copy-Left
Print from
Finished page #:
Front page
Next copy page: Rear
Scanning
finished
Set
Cancel
Insert
page
2 sided copy-Left
Print from
Finished page #:
Rear page
Next copy page: Front
Scanning
finished
1-61