Country/Code Page Command - Intermec EasyCoder PL3 Programmer's Reference Manual

Chapter 8— Advanced Commands
Example: The following example instructs the printer to wait 1/4 second and if there

Country/Code Page Command

Purpose: The Country/Code Page command substitutes the appropriate character
Format:
Example Input:
78
is no printer activity within this interval to then advance the media 80
dot-lines. The printer will retract the media by the same amount before
printing the next label.
Input (PRESENT-AT.LBL):
! 0 200 200 250 1
TEXT 7 0 0 10 PRESENT-AT EXAMPLE
PRESENT-AT 80 2
FORM
PRINT
set for the specified country.
{command} {name}
where:
{command}: COUNTRY
{name}: Choose from the following:
USA
GERMANY
FRANCE
SWEDEN
SPAIN
NORWAY
CHINA
ITALY
CP850
UK
Input (COUNTRY.LBL):
! 0 200 200 80 1
IN-MILLIMETERS
JOURNAL
CENTER
; Set the country as USA
COUNTRY USA
; Now Print Text From ISO substitution Table
TEXT 4 0 0 8 COUNTRY IS USA
TEXT 4 0 0 15 #$@[\]^'{|}~
; Set country for France and print the same text
COUNTRY FRANCE
EasyCoder PL-Series Printer Programmer's Reference Manual