Table of Contents
Advertisement
Chapter 8— Advanced Commands
Example:
On-Out-Of-Paper Command
Purpose: You can issue this command to instruct the printer as to the course of
Format:
Example: This example instructs the printer to attempt to print the label twice.
On-Feed Command
Purpose: You can configure your printer to ignore, form feed, or reprint the last
74
Input (SETSP.LBL):
! 0 200 200 210 1
T 4 0 0 10 Normal Spacing
SETSP 5
T 4 0 0 50 Spread Spacing
SETSP 0
T 4 0 0 90 Normal Spacing
FORM
PRINT
action to take when it encounters an error while printing the label (such as
running out of stock).
{command} {action} {number of retries}
where:
{command}:
ON-OUT-OF-PAPER
{action}:
Choose one of the following:
PURGE: Discard the label if print error is
WAIT:
{number of retries}: Specify how many times the printer should attempt to
print the label. Range is 1 to 16.
The default printer configuration is ON-OUT-OF-PAPER PURGE 2.
Input (OOP.LBL):
! 0 200 200 150 1
ON-OUT-OF-PAPER WAIT 2
TEXT 5 0 0 20 MAKE TWO ATTEMPT
FORM
PRINT
label when you press the Feed button or when it receives a form-feed
character (0x0c).
EasyCoder PL-Series Printer Programmer's Reference Manual
encountered after the specified number of
attempts.
Do not discard the label if print error is
encountered. In this mode the printer
waits for the error to be corrected before
making the next print attempt.
Advertisement
Table of Contents
