Using Comments - Intermec EasyCoder PL3 Programmer's Reference Manual

Example Input 1:
Example Output 1:
Example Input 2:
Example Output 2:

Using Comments

Purpose: You can add comments between the first line of a command session and
Example Input:
EasyCoder PL-Series Printer Programmer's Reference Manual
Input 1 (UNITS1.LBL):
! 0.3937 200 200 1 1
IN-INCHES
T 4 0 0 0 1 cm = 0.3937"
IN-DOTS
T 4 0 0 48 1 mm = 8 dots
B 128 1 1 48 16 112 UNITS
T 4 0 48 160 UNITS
FORM
PRINT
Input 2 (UNITS2.LBL):
! 0 200 200 2.54 1
IN-CENTIMETERS
T 4 0 1 0 1" = 2.54 cm
IN-MILLIMETERS
T 4 0 0 6 203 dots = 25.4 mm
B 128 0.125 1 6 12 14 UNITS
T 4 0 16 20 UNITS
FORM
PRINT
the Print command.
A comment is placed in the file by starting a line with the ";" character in
the first column. Any remaining text to the end of the line is ignored.
Comments are illegal between the Concat and Endconcat commands.
Input (COMMENT.LBL):
! 0 200 200 25 1
IN-MILLIMETERS
JOURNAL
Chapter 2— Printer Commands
13