Enable Prompts/Code; Ui Enable Prompts/Code Page Inquiry - Intermec EasyCoder C4 Programmer's Manual

UI – Enable Prompts/Code Page Inquiry
Description
Syntax
Parameters
Remarks
Example
Also see
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command will cause the printer to enable prompts to be sent to the host
and to send the currently selected code page to the host through the serial
RS-232 port.
UI
The printer will send information on the currently selected code page back to
the host in the following format:
UIp p ,p
1 2 3
p Number of data bits.
1
p Code page.
2
p Country code.
3
The KDU (Keyboard Display Unit) automatically sends this command each
time power is applied. The UI command is disabled by removing power from
the printer for 60 seconds.
UI
UI80,001
I and U commands
:Enables prompts from host
and returns current code page, for example
Chapter 7 Commands
86