Wlan.kerberos.mode; Wlan.kerberos.password - Intermec EasyCoder PL3 Programmer's Reference Manual

EasyCoder PL-Series Printer Programmer's Reference Manual
getvar result Returns the current Kerberos KDC.
Example Description
Syntax
Result
setvar choices 0 to 32 ASCII characters. Default = krbtgt
Example Description
Syntax
Result

wlan.kerberos.mode

Type: getvar; setvar
Note: Intermec terminals currently do not support Kerberos network
authentication protocol.
This parameter refers to the Kerberos network authentication protocol.
Kerberos provides secure mutual authentication for a wireless client
through an access point based on user information stored on a Kerberos
KDC server.
getvar result Returns the current Kerberos mode.
Example Description
Syntax
Result
setvar choices on, off. Default = off
Example Description
Syntax
Result

wlan.kerberos.password

Type: getvar; setvar
This parameter refers to the Kerberos password. The password must
correspond to a user profile established on the Kerberos KDC server in
use.
Chapter 13— Configuration/Control Commands
Get the current Kerberos KDC.
! U1 getvar "wlan.kerberos.kdc"
"krbtgt"
Set the Kerberos KDC to krbtgt.
! U1 setvar "wlan.kerberos.kdc" "krbtgt"
Sets the Kerberos KDC to krbtgt.
Get the current Kerberos mode.
! U1 getvar "wlan.kerberos.mode"
"off"
Turn on Kerberos mode.
! U1 setvar "wlan.kerberos.mode" "on"
Sets the Kerberos mode to on.
153