Table of Contents
Advertisement
Chapter 8— Advanced Commands
Format:
Example Input 1:
Example Output 1:
Example Input 2:
Example Output 2:
Pace Command
Purpose: You can use this command with batch printing. When Pace is activated,
70
{command} {width}
where:
{command}: Choose from the following:
PAGE-WIDTH
(or PW)
{width}:
Unit-width of the page. For help, see "Units Commands" in
Chapter 2.
Input 1 (PW1.LBL):
! UTILITIES
SETLP 7 0 15
PW 300
PRINT
This text is printed with label memory width set to 300 dots.
Input 2 (PW2.LBL):
! UTILITIES
SETLP 7 0 15
PW 200
PRINT
This text is printed with label memory width set to 200 dots.
you must press the Feed button to print additional labels until the batch
quantity is exhausted. By default, pacing is disabled on power up.
EasyCoder PL-Series Printer Programmer's Reference Manual
Specifies page width.
Advertisement
Table of Contents
