Maxicode - Intermec EasyCoder PL3 Programmer's Reference Manual

Chapter 6— Two-Dimensional Bar Codes
Example Input:
Example Output:

MaxiCode

Purpose: The MaxiCode bar code now handles all the symbols defined by the
Format:
52
<ENDPDF>: Terminates PDF417.
Note: The Bar Code Text command does not work with the PDF417 bar
code type. You must enter any desired human readable text separately with
the Text command as in the next example.
Input (PDF.LBL):
! 0 200 200 210 1
B PDF-417 10 20 XD 3 YD 12 C 3 S 2
PDF Data
ABCDE12345
ENDPDF
T 4 0 10 120 PDF Data
T 4 0 10 170 ABCDE12345
FORM
PRINT
United Parcel Service as well as the basic fields supported in the standard
bar code. MaxiCode supports all standard printable characters with
automatic conversion of all lowercase letters in the secondary message to
uppercase. This revision supports only Mode 2 bar codes.
{command} {type} {x} {y}
{tag} {options}
...
{tag} {options}
<ENDMAXICODE>
where:
{command}:
{type}:
{x}:
{y}:
EasyCoder PL-Series Printer Programmer's Reference Manual
BAR CODE or B
MAXICODE
Horizontal starting position. For help, see "Label
Coordinate System" in Chapter 1.
Vertical starting position. For help, see "Label
Coordinate System" in Chapter 1.