Table of Contents
Advertisement
Chapter 3— Text
Text Commands
Purpose: You use the Text command to place text on a label. This command and its
Format:
18
variants control the specific font number and size used, the location of the
text on the label, and the orientation of this text. Standard resident fonts
can be rotated to 90.5 increments as shown in the example.
{command} {font} {size} {x} {y} {data}
where:
{command}: Choose from the following:
TEXT
(or T)
VTEXT
(or VT)
EasyCoder PL-Series Printer Programmer's Reference Manual
Prints text horizontally.
Prints text (vertically) rotated 90
degrees counterclockwise.
Advertisement
Table of Contents
