Bluetooth.date; Bluetooth.discoverable; Bluetooth.friendly_Name - Intermec EasyCoder PL3 Programmer's Reference Manual

EasyCoder PL-Series Printer Programmer's Reference Manual

bluetooth.date

Type: getvar
This parameter is the release date of the Bluetooth module.
getvar result Returns the printer's Bluetooth library release date in the format
mm/dd/yy.
Example Description
Syntax
Result

bluetooth.discoverable

Type: getvar; setvar
This parameter sets the Bluetooth discoverable mode. If set to on (the
default), a Bluetooth device inquiry can discover the printer, and then you
can link the printer to a master device. When set to off, you can only
manually link the printer.
getvar result Returns the current discoverable mode setting of off or on.
Example Description
Syntax
Result
setvar choices off, on. Default = on
Example Description
Syntax
Result

bluetooth.friendly_name

Type: getvar, setvar
This parameter sets the friendly name, which is part of the local name used
during service discovery and also affects authentication. The friendly name
is a string of up to 20 characters long; it defaults to the printer serial
number if not set.
Changes to local name and authentication do not occur until you turn off
and on the printer or you issue the device.reset command.
Chapter 13— Configuration/Control Commands
Get printer's Bluetooth module release date.
! U1 getvar "bluetooth.date"
"02/12/02"
Get the current Bluetooth discoverable mode.
! U1 getvar "bluetooth.discoverable"
"on"
Disable discoverable mode.
! U1 setvar "bluetooth.discoverable"
"off"
Printer disables discoverable mode.
123