Power.low_Battery_Warning; Power.percent_Full; Power.status; Power.voltage - Intermec EasyCoder PL3 Programmer's Reference Manual

Chapter 13— Configuration/Control Commands
136

power.low_battery_warning

Type: getvar
This parameter refers to the low battery warning level.
getvar result Returns the current low-battery warning level in volts.
Example Description
Syntax
Result

power.percent_full

Type: getvar
This parameter refers to the battery status.
getvar result Returns the battery status as percent full.
Example Description
Syntax
Result

power.status

Type: getvar
This parameter refers to the battery status.
getvar result Returns ok or low.
Example Description
Syntax
Result

power.voltage

Type: getvar
This parameter refers to the battery voltage.
getvar result Returns the battery voltage.
Example Description
Syntax
Result
EasyCoder PL-Series Printer Programmer's Reference Manual
Get current low-battery warning level.
! U1 getvar "power.low_battery_warning"
"6.86(176)"
Get current battery status.
! U1 getvar "power.percent_full"
"43% Full"
Get current battery status.
! U1 getvar "power.status"
"ok"
Get current battery voltage.
! U1 getvar "power.voltage"
"7.25"