Chapter 3— Text
Example Output:
Setmag Command
Purpose: The Setmag command magnifies a resident font to the magnification
Format:
Example Input:
24
factor specified.
{command} {w} {h}
where:
{command}: SETMAG
{w}:
Width magnification of the font. Valid magnifications are 1
thru 16.
{h}:
Height magnification of the font. Valid magnifications are 1
thru 16.
Note: The Setmag command stays in effect after printing a label. This
functionality means that the next label printed uses the most recently set
Setmag values. To cancel any Setmag values and allow the printer to use its
default font sizes, use the Setmag command with magnifications of 0,0.
Input (SETMAG.LBL):
! 0 200 200 210 1
CENTER
SETMAG 1 1
TEXT 0 0 0 10 Font 0-0 at SETMAG 1 1
SETMAG 1 2
TEXT 0 0 0 40 Font 0-0 at SETMAG 1 2
SETMAG 2 1
TEXT 0 0 0 80 Font 0-0 at SETMAG 2 1
SETMAG 2 2
EasyCoder PL-Series Printer Programmer's Reference Manual