No-Pace Command; Wait Command - Intermec EasyCoder PL3 Programmer's Reference Manual

Chapter 8— Advanced Commands
Example: This example instructs the printer to print ten labels. The printer prints a

No-Pace Command

Purpose: This command cancels the Pace and Auto-Pace mode if the printer is
Format:
Example: This example instructs the printer to print ten labels. The printer prints a

Wait Command

Purpose: You use this command to introduce a delay after a label is printed.
Format:
72
where:
{command}: AUTO-PACE
label and waits for that label to be removed before printing the next label.
Input (APACE.LBL):
! 0 200 200 250 10
CENTER
TEXT 7 0 0 10 AUTO-PACE EXAMPLE
AUTO-PACE
FORM
PRINT
already in Pace or Auto-Pace mode. The printer defaults to No-Pace mode
on power up.
{command}
where:
{command}: NO-PACE
label and waits for the label to be removed before printing the next label.
The second set of ten labels is printed in batch mode, and the printer does
not wait for the operator to remove the labels.
Input (NO-PACE.LBL):
! 0 200 200 250 10
TEXT 7 0 0 10 AUTO-PACE EXAMPLE
AUTO-PACE
FORM
PRINT
! 0 200 200 250 10
TEXT 7 0 0 10 NO-PACE EXAMPLE
NO-PACE
FORM
PRINT
{command} {delay-time}
where:
{command}: WAIT
EasyCoder PL-Series Printer Programmer's Reference Manual