Intermec EasyCoder PL3 Programmer's Reference Manual page 93

Format:
Example: In the following example, the command file shown was sent to the printer
EasyCoder PL-Series Printer Programmer's Reference Manual
{command} {action}
where:
{command}: ON-FEED
{action}: Choose from the following:
IGNORE
FEED
REPRINT Reprint the last label when the Feed button is
only once. The two additional labels were produced by pressing the printer
Feed button once for each additional label.
Input (ONFEED.LBL):
! 0 200 200 300 1
ON-FEED REPRINT
CENTER
JOURNAL
TEXT 4 1 0 20 PRESS FEED KEY
TEXT 4 1 0 100 TO REPRINT
TEXT 4 1 0 180 THIS TEXT
PRINT
Chapter 8— Advanced Commands
Don't take any action when the Feed button is
pressed or when the form-feed character is
received.
Feed to top-of-form when the Feed button is
pressed or when the form-feed character is
received.
pressed or when the form-feed character is
received.
75