Figure 4-9. Tightening The Bracket Screws; Figure 4-10. Plugging In The Audio, Atapi, And Power Cables - HP Vizualize,Visualize b2000 Supplementary Manual

Unix workstation
Hide thumbs Also See for Vizualize,Visualize b2000:
Table of Contents

Advertisement

Field Replaceable Units
FRU Removal and Replacement
10.Tighten the two CD drive bracket screws as shown in Figure 4-9.

Figure 4-9. Tightening the Bracket Screws

Bracket Screw
11.Rotate the workstation around until you see the open, left side of the workstation. Plug
the audio, ATAPI, and power cables into their appropriate connectors on the rear of the
CD drive, as shown in Figure 4-10. Note that the connectors are keyed for proper
insertion, and that you should connect the audio cable first.
NOTE
The red striped side of the ATAPI cable should be positioned next to the
power cable.

Figure 4-10. Plugging in the Audio, ATAPI, and Power Cables

Audio
Cable
Ferrite Bead
ATAPI Cable
Power Cable
94
Bracket
Screw
(hidden)
Chapter 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualize b2000C3700 - workstation

Table of Contents