Figure 5-15 Plugging In The Audio, Atapi And Power Cables; Figure 5-16 Tightening The Bracket Screws - HP Visualize b1000 - Workstation Owner's Manual

Changing Your Computer Hardware Configuration
Removable Media Devices
7. Plug the audio, ATAPI and power cables into their appropriate
Figure 5-15 Plugging in the Audio, ATAPI and Power Cables
Ferrite Bead
8. Tighten the two CD drive bracket screws as shown in Figure 5-16.
Figure 5-16 Tightening the Bracket Screws
118
connectors. Note that the connectors are keyed for proper insertion.
See Figure 5-15. To help with plugging in the audio connector, you can
pull its cable through the back of the CD drive chassis to the front of
the CD drive chassis and connect it. Note that you should connect the
audio cable first.
Audio
Cable
ATAPI Cable
Power Cable
The screws should be tightened using 6 inch-pounds of torque.
Bracket Screw
Bracket
Screw
(hidden)
Chapter 5