Figure 4-18. Removing The Floppy Disk Drive Bay's Rear Cover; Figure 4-19. Front Of Workstation With The Front Panel Removed - HP Vizualize,Visualize b2000 Supplementary Manual

Field Replaceable Units
FRU Removal and Replacement
2. Remove the rear cover of the floppy disk drive bay inside the workstation by unscrewing
the T-15 Torx/slotted screw as shown in Figure 4-18. Push the cover handle toward the
rear of the floppy disk drive approximately one inch, and then pull the cover handle
toward you.

Figure 4-18. Removing the Floppy Disk Drive Bay's Rear Cover

Rear Cover Handle
Power
Cable
Rear Cover
Data Cable
3. Rotate the workstation around until you see the front of the workstation as shown in
Figure 4-19.

Figure 4-19. Front of Workstation with the Front Panel Removed

Floppy Disk
Drive Blank
Bracket Screw
100
LCD
T-15
Torx/Slotted
Screw
Bracket Screw
Chapter 4