Resetting The Workstation - HP Vizualize,Visualize b2000 Supplementary Manual

Resetting the Workstation

To reset the system to its predefined values, follow the directions in "Accessing the Boot
Console Handler" earlier in this chapter, and then type the following at the prompt and
press :
Enter
Main Menu: Enter command> co
When the Configuration Menu appears, type the following at the prompt and press
Configuration Menu: Enter command> default
When the Configuration Menu appears again, type the following at the prompt and press
:
Enter
Configuration Menu: Enter command> reset
Chapter 6
Boot Console Handler
Resetting the Workstation
:
Enter
147