Selecting The Stormscope Page - Garmin G1000:Beechcraft Baron 58/G58 User Manual

HAZARD AVOIDANCE
Selecting a Stormscope range on the Navigation Map:
1) Press the MENU Key.
2) Select 'MAP SETUP'.
3) Select the 'Weather' group.
4) Press the ENT Key.
5) Turn the large FMS Knob to select 'STRMSCP SMBL'.
6) Turn the small FMS Knob to select the maximum display range.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the RANGE Knob clockwise to zoom out or
counter-clockwise to zoom in.

SELECTING THE STORMSCOPE PAGE

Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Stormscope Page.
3) To change the map range, turn the RANGE Knob clockwise to zoom out or counter-clockwise to zoom in.
6-54
Figure 6-61 Stormscope Page
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT 190-00663-00 Rev. A