Arrivals - Garmin G1000:Beechcraft Baron 58/G58 User Manual

ARRIVALS

A Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrival
can be loaded at a time in a flight plan. If an arrival is loaded when another arrival is already in the active
flight plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoints, and a runway.
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN
Loading an arrival into the active flight plan using the PROC Key:
1) Press the PROC Key. The Procedures Window is displayed.
2) Highlight 'SELECT ARRIVAL'.
3) Press the ENT Key. The Arrival Loading Page is displayed.
4) Select an arrival from the list and press the ENT Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. 'LOAD?' is highlighted.
8) Press the ENT Key to load the arrival procedure.
190-00663-00 Rev. A
Available Procedure Actions
Loaded Procedures
Figure 5-89 Arrival Selection
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
FLIGHT MANAGEMENT
Destination Airport
Arrival Preview Arrival Choices
5-99